| |
|
|
|
|
|
|
| Cehisa
PRO-7 Hotmelt Edgebander
The newly designed, automatic edgebander PRO-7 gives the smaller
woodworker the possibility to access the features of larger edgebanders
for a price/advance level never before seen in the industry. The
quality of the components, stations and work units on the PRO-7
is of the level normally found only on highly advanced models.
Equipped w/2 stations: end trim and top & bottom trimming
Large coil table for roll material Automatic roll cutter &
strip feed magazine Quick changeover for rolls or strip material
Standard guillotine for cutting up to 1.2mm PVC from the coil
Quickmelt glue pot w/quick change disconnect for ease of maintenance
or glue color change if required. 10 - 15 minutes heat-up time (depending
upon voltage) Digital thermostat w/approaching temperature control
PDI and auto temperature drop Control panel located on in-feed
end of machine for easy access Pressure station w/one motorized
pressure roller plus one additioanl pressure roller End trim station,
single motor w/double blade motor Top & bottom trim station
equipped w/digital and carbide bevel tooling Digital on top of
pressure beam for height indication Digital on pressure station
Digitals on top & bottom trim station Fixed speed at 33
feet per minute 220V 3 PH (+/-5%, depending on voltage).
|
|
 |
|
|
Cehisa
EP-8 Rapid Series Hotmelt Edgebander
This machine is equipped w/3 stations: end trim,
top & bottom trimming, and buffing Large coil table for
roll material Automatic roll cutter & strip feed magazine
Quick changeover for rolls or strip material Standard guillotine
for cutting up to 2.5mm PVC from the coil Quickmelt glue pot
with quick change disconnect for ease of maintenance or glue color
change if required. 10-15 minutes heat-up time (depending upon
voltage) Digital thermostat with approaching temperature control
PDI and auto temperature drop Control panel located on in-feed
end of machine for easy access Pressure station with one motorized
pressure roller plus 2 additional pressure rollers End Trim
station, single motor with double blade motor Top & Bottom
tiltable trim station equipped with digitals and straight insert
tooling (for flush & bevel trimming) Buffing station Electronic
programmable logic control Disposable carbide insert tooling
for surface trimmers Digital on top pressure beam for height
indication Digital on pressure station Digitals on top &
bottom trim station Fixed speed at 33 FPM 220 volt/3 phase
(+/- 5%,depending on voltage)
|
|
 |
|
|
Cehisa
EP-C Contour Edgebander
Semi-automatic edgebander for round, curved and
straight panels Foot pedal control for guilotine Foot pedal
control for feeding unit Programmable encoder for the predetermined
length of material to be applied Hotmelt glue can be applied
either to the edgebanding or to the panel edge Variable speed
is standard The front table tilts for beveled panels Equipped
for 3mm PVC material Phenolic table top Electronic thermostat
Minimun radius: 1" (25mm) Minimum panel thickness: 3/8"
(10mm) Maximum panel thickness: 2-1/4" (60mm) Minimum
edgebanding thickness: .015" (0.3mm) Maximum edgebanding
thickness: 1/8" (3mm) Variable speeds: 8-20 ft./min.
Minimum panel length: 11" Height of table: 42" Width
of machine: 40" Length of machine: 44" Weight: 880
lbs.
|
|
 |
|
|
Cehisa
EP-2S Compact Series Edgebander
The modern woodworking industry has great need for
a fully automatic hotmelt glue edgebander with maximum versatility,
simple operation and adjustment, compact size and a very affordable
price. Such economy and productivity are absolute necessity for
small to medium shops in these competitive times. The Cehisa Compact
line answers the challenge.
Maximum workpiece thickness: 2" (50mm) Minimum workpiece thickness:
3/8" (9mm) Maximum workpiece width: unlimited Minimum
workpiece width: 3" (76mm) Net machine weight: 235 lbs.
(110 Kg)
|
|
|
|
|
AMT
EDGEMASTER GP Edgebander
AMT offers an edgebander that is small in size yet
big in ability. The EDGEMASTER GP boasts features available in
larger machines costing thousands more but in a compact and affordable
package. Automatic panel feed, digital electronic temperature
control with standby temperature reduction mode and adjustable
glue extrusion. It's innovative design makes it extremely easy
to operate. Precision components machined from 6061 T6 Aircraft
Grade Aluminum, anodized for durability and ease of maintenance.
Micro adjust tape guide makes changing tape widths fast and simple.
Electromagnetic end cutters means no need for compressed air supply.
Accutrim edge trim system uses Porter Cable 28000 RPM industrial
duty trim motors to ensure a finish that requires no filing or
sanding of edges. Dust collection outlet keeps trimmings off your
workpiece.
Dimensions: 72" L x 48" H x 37" D Weight: 300
lbs. Power supply: 220V - 20A - 1PH Tape types: polyester/PVC/wood/single
laminate strips Tape widths: 1/2" to 1-3/4" Maximum
thickness: 1mm Feed rate: 20 FPM
|
|
|
