Powermatic PJ882 8" Parrallelogram Jointer (Stock#1610079 2HP 1PH, Stock# 1610080 3HP 3PH)

The new 8" Parallelogram Jointer offers performance and value in a machine loaded with features like an extra long 82" bed length for better work support, innovative fence design that allows you to turn a handwheel that tilts the fence in and out with positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut finish and allows for a fast depth of cut adjustment. This design also insures the table remains perfectly parallel, even after years of of tough duty. The 1/8" depth limiter control knob gives you quick adjustment ability and safety. A quick twist of the knob will disable this feature. This jointer features Powermatic controlled chip 3-knife cutterhead for a safe, smooth cut every time. The powerful 3HP motor is totally enclosed in a heavily constructed steel stand providing plenty of power for even the most demanding jobs.

Cutting Capacity (WxD/in): 11-3/4 x 3/4
Cutterhead Speed (RPM): 5000
Number of Knives: 3
Rabbeting Capacity (in): 3/4
Table Surface (WxL/in): 12 x 84
Fence (HxL/in): 5-1/2 x 47
Blade Size (LxWxT/in): 12 x 13/16 x 1/8
Fence Tilts: 45 degrees L, 45 degrees R
Positive Stops: 90 degrees, 45 degrees

Motor HP/Voltage/PH 7-1/2HP 230/460V 3PH
Maximum Working Width (in) 16
Maximum Depth Cut (in) 3 /4
Cuts Per Minute 20,800
Table Size (L x W/in) 19 x 96
Infeed Table (L/in) 47-1/2
Outfeed Table (L/in) 47-1/4
Rabbeting Ledge (LxW/in) 5 x 24-1/2
Table Height (in) 37-1/2
Fence Size (H x L/in) 5-1/4 x 47-1/4
Fence Tilts 45 degrees in/out
Fence Positive Stops 45 deg., 90 deg.
Cutterhead Diameter (in) 4.5
# of Knives Helical Head 105 4-sided inserts
Standard Knife Size (mm) 14 x 2
Cutterhead Speed (RPM) 5200
Rabbeting Capacity (in) 3/4
Dust Connect Diameter (in) 6
Minimum CFM Required 800

Powermatic PJ1696 16" Jointer Stock# 1791283

The new 16-inch jointer offers big capacity and performance in a machine that is loaded with features. Large center-mounted fence assembly adjusts easily via rack and pinion system with ram lock. Preset stops on the fence body allow for fast angle set-up at 45 degrees in and out and a positive stop for perfect 90.
The Parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insure the tables remain perfectly parallel even after years of tough duty.
The specially designed solid steel Helical cutterhead consists of six rows of staggered 14 mm inserts precision ground on 4 sides. This system makes fast work of knife changing and never needs adjustment.
The big 7-1/2HP motor delivers all the power you will need for even the biggest jobs!

• Enclosed a steel cabinet houses a powerful 1HP motor and includes an integral dust connector with 4" diameter outlet for easy dust collection hook-up.
• Rack and pinion fence adjustment for precise fence movement.
• Large cast-iron infeed and outfeed tables support extra long stock.
• Conveniently-positioned, on/off paddle switch is placed high above the table, in full operator view, for quick access.
• Safety cutterhead guard pivots out of the way of work during operation.
• Extra-large, center-mounted, cast-iron fence provides maximum work support throughout the cut.
• Quick-index, infeed table positioning lever for fast, accurate set-up.

Model 37-195
Delta Industrial Model 37-195 6" Professional Jointer with a 1HP, 120/240V induction motor; enclosed stand, dust collector connector, center-mounted fence, 3-knife cutterhead, cutterhead guard, push blocks and instruction manual.

Motor
• 1 HP
WEIGHT
• 225 lbs.(102 kg)
Cutting Capacity (max. width)
• 6 1/8"
Cuts Per Minute
• 14,400
MOTOR
• 1 HP CUTTERHEAD
• Speed: 4800 rpm, 14,400 cpm
• Number of Knives: 3
• Diameter: 2 1/2"(64 mm)
CUTTING CAPACITY
• Width: 6 1/8"(156 mm)
• Depth: 1/8"(3 mm max.)
• Rabbeting: 1/2"(13 mm)
TABLE
• Length: 46"(1168 mm)
• Length of Rear Table: 22 1/2"(572 mm)
• Length of Front Table: 22"(559 mm)
• Height from Floor: 32 1/2"(826 mm)
FENCE
• Size: 4 7/8" X 35"(124 X 889 mm)
• Tilts in and out: 45° right and left
• Positive stops: 90°, 45° R and L
OVERALL DIMENSIONS
• Width: 46"(1168 mm)
• Depth: 28 1/2"(724 mm)
• Height: 48 1/2"(1232 mm)

• Enclosed a steel cabinet houses a powerful 1 1/2HP motor and includes an integral dust connector with 4" diameter outlet for easy dust collection hook-up.
• Rack and pinion fence adjustment for precise fence movement.
• Large, cast-iron infeed and outfeed tables support extra long stock.
• Safety cutterhead guard pivots out of the way of work during operations.
• Conveniently-positioned, on/off paddle switch is placed high above the table.
• Extra-large, center-mounted, cast-iron fence provides maximum work support throughout the cut and tilts 45° in and out.
• Infeed table positioning lever is easy to use for fast, accurate height adjustments.

Model 37-380
Delta Industrial Model 37-380 8" Professional Jointer with a 1 1/2HP, 120/240V motor; enclosed stand, dust collector connector, center-mounted fence, 3-knife cutterhead guard, push blocks and instruction manual.

MOTOR
• 1 1/2 HP
WEIGHT
• 414 lbs.(188 kg)
Cutting Capacity (max. width)
• 8"
Cuts Per Minute
• 16,800
MOTOR
• 1 1/2 HP CUTTING CAPACITY
• Width: 8"(203 mm)
• Depth: 1/2"(13 mm max.)
• Rabbeting: 1/2"(13 mm)
CUTTERHEAD
• Diameter: 2 1/2"(64 mm)
• Number of knives: 3
• Speed: 5600 rpm, 16,800 cpm
TABLE
• Length: 72 3/4"(1848 mm)
• Length of infeed table: 35 1/4"(895 mm)
• Length of outfeed table: 35 5/8"(905 mm)
• Height from floor 32 1/2"(826 mm)
FENCE
• Size: 4 7/8" X 35"(124 X 889 mm)
• Tilt: 45° in and out
• Positive stops: 90° and 45° in and out
OVERALL DIMENSIONS
• Depth: 34"(864 mm)
• Width: 72 3/4"(1848 mm)
• Height: 48"(1219 mm)

Motor
• 1 1/2 HP
Cutting Capacity (max. width)
• 8"
Cuts Per Minute
• 16,500
Motor (enclosed stand)
• 120/240V, 60 Hz., single phase TEFC, 3450 rpm
Cutting Capacity
• Depth: 5/8"
• Rabbeting Capacity: 5/8" Cutterhead
• Speed: 5500 rpm, 16,500 CPM
• Number of knives: 3
• Diameter: 3 3/8"
• Runs on sealed, lubricated-for-life ball bearings
Table
• Length: 76 1/2"
• Length of rear table (outfeed): 32"
• Length of front table (infeed): 42"
• Height from floor: 32"
Fence
• Size: 5" x 35"
• Tilts in and out: 45 degrees
• Positive Stops: 90 & 45 degrees in and out
Overall Dimensions
• Height: 32"
• Width: 26"
• Length: 76 1/2"
Weight
• 394 lbs.

Model 37-350A
Delta Industrial Model 37-350A DJ-20 8" Precision Jointer with 1 1/2HP, 120/240V, 60 Hz., single phase motor, a Model 37-355 set of 3 HSS knives, cutterhead module, cutterhead guard, with wrenches, rabbeting ledge, tilting fence, push blocks, two pulleys and instruction manual.
• Unique parallelogram support system allows the table to move in the same area as the cutterhead when raised and lowered. This uniform, close clearance to the cutting blade acts as a more efficient chip breaker. Table supports (4 per table) are linear-extension, spring counterbalanced; adjustment is virtually effortless despite weight of cast-iron tables. Aluminum lips bolted to the main tables are replaceable to compensate for wear.
• The DJ-20's 8" cutting capacity is ample for the majority of wood widths available. Cast-iron base assures less vibration; cabinet stand completely encases motor and pulleys to protect from dust and shavings. Large panels allow easy access inside the stand if adjustment or repair is necessary. Built-in chip chute is designed for hook-up to a dust collection system if required.
• Big 4" x 12" rabbeting ledge supports work securely right at the cutterhead. Note how center-mounted fence acts as a rear guard when fence is moved forward to table edge.
• Specially-designed cast-iron fence is extra long for continued support throughout the cut. Fence is center-mounted and functions as a rear guard on narrow cuts. Positive stops 45 degrees in and out for accurate chamfering and beveling - scale in back measures angle set. Handy stock scale mounted at the end of fence measures jointed stock prior to planing in English or Metric.
• Extra-long infeed table provides a full 42" of work support. Unique diamond ribbing ensures that weight is best distributed throughout the length. Height adjustment lever and locking handle facilitate repetitive jointing.
• Modular cutterhead provides a consistently clean cut. Three knives operate at 5500 rpm - 16,500 cuts per minute for a smooth finish. Cutterhead knives project only .020" above cutterhead surface to help reduce kickback of stock. Jack-screw arrangement allows easy replacement and adjusment of individual knives. In the event the entire cutterhead has to be removed, a new module can be fitted in place without production down-time.

Motor
• 3 HP
Cutting Capacity (max. width)
• 12"
Cuts Per Minute
• 15,000
MOTOR
• 3 HP
CUTTING CAPACITY
• Width: 12"(304 mm)
• Depth: 3/4"(19 mm)
• Rabbeting Capacity: 3/4"(19 mm) CUTTERHEAD
• Speed: 5,000 rpm; 15,000 CPM
• Number of Knives: 3
• Diameter: 3 7/8"(98 mm)
TABLE
• Length: 84"(2134 mm)
• Length of Infeed Table: 41 1/2"(1054 mm)
• Length of Outfeed Table: 41 1/2"(1054 mm)
• Width: 13"(330 mm)
• Height from Floor: 32"(813 mm)
FENCE
• Size: 5 1/2" X 47"(140 X 1194 mm)
• Tilts In and Out: 45°
• Positive Stops: 90°, 45° In and Out
• Dust Chute: 5" Outside Diameter (127 mm)
OVERALL DIMENSIONS
• Length: 84"(2134 mm)
• Width: 40"(1016 mm)
• Height: 43"(1092 mm)
• Weight:706 lbs.(320 kg)

Model 37-360
Delta Industrial Model 37-360 DJ-30 12" Jointer with a three-phase, 3HP motor, set of three knives, cutterhead assembly, cutterhead guard, wrenches, rabbeting ledge, tilting fence, push blocks and instruction manual.
Delta Industrial Model No.37-361 DJ-30 12" Jointer Same as above except with single-phase, 3HP motor.

• Versatile 5 1/2" X 47" fence tilts in and out at 45° and features positive stops at both 45° and 90°.
• Hinged door and removable door panel allow for easy access to the motor and V-belts.
• Center-mounted fence safely encloses the rear of the cutterhead when working to the front of the machine. Rack and pinion movement for smooth, precise adjustment.
• Infeed and outfeed tables have an easy-to-use lever for raising and lowering table bed. English/Metric depth-of-cut scale is an accurate guide for measuring cutting depth.
• Large 3 7/8" -diameter, 3-knife cutterhead operates at 5000 rpm for producing 15, 000 cuts per minute.
• The infeed and outfeed tables are constructed of cast-iron and are heavily ribbed underneath for solid support.
• Parallelogram support system allows the table to move up or down in the same arc as the cutterhead, allowing less space between the table and cutterhead for safer, more efficient cutting.
• Push-button on/off switch is positioned high above the table for reaching easily and safely.
• Replaceable, ductile, iron-serrated table rips for noise reduction.
• Dust hood with 5" diameter outlet accepts dust collection systems for collecting dust and chips.

Motor
• 3 HP
Cutting Capacity (max. width)
• 12"
Cuts Per Minute
• 15,000
MOTOR
• 3 HP
CUTTING CAPACITY
• Width: 12"(304 mm)
• Depth: 3/4"(19 mm)
• Rabbeting Capacity: 3/4"(19 mm) CUTTERHEAD
• Speed: 5,000 rpm; 15,000 CPM
• Number of Knives: 3
• Diameter: 3 7/8"(98 mm)
TABLE
• Length: 84"(2134 mm)
• Length of Infeed Table: 41 1/2"(1054 mm)
• Length of Outfeed Table: 41 1/2"(1054 mm)
• Width: 13"(330 mm)
• Height from Floor: 32"(813 mm)
FENCE
• Size: 5 1/2" X 47"(140 X 1194 mm)
• Tilts In and Out: 45°
• Positive Stops: 90°, 45° In and Out
• Dust Chute: 5" Outside Diameter (127 mm)
OVERALL DIMENSIONS
• Length: 84"(2134 mm)
• Width: 40"(1016 mm)
• Height: 43"(1092 mm)
• Weight:706 lbs.(320 kg)

Model 37-361
Delta Industrial Model 37-360 DJ-30 12" Jointer with a three-phase, 3HP motor, set of three knives, cutterhead assembly, cutterhead guard, wrenches, rabbeting ledge, tilting fence, push blocks and instruction manual.
Delta Industrial Model No.37-361 DJ-30 12" Jointer Same as above except with single-phase, 3HP motor.

• Versatile 5 1/2" X 47" fence tilts in and out at 45° and features positive stops at both 45° and 90°.
• Hinged door and removable door panel allow for easy access to the motor and V-belts.
• Center-mounted fence safely encloses the rear of the cutterhead when working to the front of the machine. Rack and pinion movement for smooth, precise adjustment.
• Infeed and outfeed tables have an easy-to-use lever for raising and lowering table bed. English/Metric depth-of-cut scale is an accurate guide for measuring cutting depth.
• Large 3 7/8" -diameter, 3-knife cutterhead operates at 5000 rpm for producing 15, 000 cuts per minute.
• The infeed and outfeed tables are constructed of cast-iron and are heavily ribbed underneath for solid support.
• Parallelogram support system allows the table to move up or down in the same arc as the cutterhead, allowing less space between the table and cutterhead for safer, more efficient cutting.
• Push-button on/off switch is positioned high above the table for reaching easily and safely.
• Replaceable, ductile, iron-serrated table rips for noise reduction.
• Dust hood with 5" diameter outlet accepts dust collection systems for collecting dust and chips.

FEATURES:
Precision ground cast-iron fence and tables
Center mounted fence
4 3/8" Handwheels
Rabbeting ledge
4" Dust port
Oversized welded steel stand
Post mounted control switch
Single V-belt drive
Shielded & lubricated ball-bearings
Powder-coated paint
Heavy-duty cabinet stand

The W1679 6" Jointer raises the standards by which all others are measured! The silky-smooth handwheel table adjustments are effortless and precise, the pedestal mounted power switch is safe and convenient, and the simple fence adjusting mechanism will have you making precision joints in no time. One look at this machine and you will see that it's in a category all its own!

SPECIFICATIONS:
Motor: 1 HP, prewired for 110V
110V magnetic switch with thermal overload protection
Optional 220V contactor available to convert switch for 220V use
Table size: 7" x 47"
Overall length: 47"
Overall depth: 27"
Height to table: 31-5/8"
Footprint: 18-1/4" x 15-1/2"
Cutterhead diameter: 2-1/2"
Cutterhead speed: 5,500 RPM
Knives - size: 3 - 6" x 1" x 1/8"
Rabbeting capacity: 1/2"
Maximum width of cut: 6"
Cutterhead speed: 5,000 RPM
Cuts per minute: 15,000
Fence tilt: 45° L , 90°, 45° R
Approx. shipping weight: 300 lbs

SPECIFICATIONS:
Motor: 2 HP, 220V, single-phase, TEFC capacitor start induction, 3,450 RPM
Amps: 14
Table size: 9-1/4" x 70"
Overall length: 70"
Overall depth: 27-1/2"
Height to table: 31-1/4"
Fence size: 39-9/16" x 4-7/8"
Footprint: 23-1/2" x 19"
Cutterhead diameter: 3"
Knives (W1684): 3 - 8" x 1" x 1/8"
Knives (W1705): 40 - 4 sided indexable carbide inserts
Rabbeting capacity: 1/2"
Max. width of cut: 8"
Cutterhead speed: 5,500 RPM
Cuts per minute (W1684): 16,500
Cuts per minute (W1705): 22,000
Fence tilt: 45° L, 90°, 45° R
Approx. shipping weight: 495 lbs.

These Shop Fox® 8" Jointers are high on everyone's wish list and offer rugged cast-iron construction, large capacity for precision edges on long boards, magnetic switches and durable center-mounted, fully adjustable 90° to ±45° tilting fence. Other features include silky-smooth handwheel table adjustments, a safe and reliable pedestal-mounted power switch, precision ground cast-iron tables and super durable powder-coated paint. Choose between the W1684 with standard three-knife cutterhead or the W1705 with spiral cutterhead and indexable carbide inserts for ultra-smooth finishes.

FEATURES:
Precision ground fence and tables
Center-mounted fence
5" Handwheels
Rabbeting ledge
Dust chute
Oversized welded steel stand
Post-mounted control switch
Dual V-belt drive
Shielded & lubricated ball-bearings
Magnetic w/ thermal overload protection switch

SPECIFICATIONS:
Motor: 3HP, 220V, single-phase, TEFC, 3,450 RPM
Table size: 8" x 76-5/16"
Tables: parallelogram design, precision ground cast iron
Infeed table size: 8" x 43-1/8"
Cast iron fence sz: 35"L x 1-1/4"W x 5"H
Cutterhead diameter: 3-3/16"
Knives: 4(HSS) 8" x 3/4" x 1/8"
Max. width of cut: 8"
Cutterhead speed: 4,900 RPM
Cuts per minute: 19,600
Max. depth of cut: 1/8"
Max. rabbeting depth: 1/2"

If you set out to design a full featured 8" jointer, you couldn't do any better than this. We started with a 3HP motor and a 4 knife cutterhead and added a precision parallelogram table adjustment mechanism, extra long infeed table, large cast iron center mounted fence, pedestal mounted switch and a built in locking mobile base. Check out the other features and you'll agree!

FEATURES:
Shielded & lubricated bearings
Precision ground cast iron tables
Fully adjustable tables
Single V-belt drive
Easy access lever adjusted tables with height gauge
Heavy-duty center mounted fence with angle gauge
Built-in dust chute with 4" port
Powder coated paint

SPECIFICATIONS:
Motor: 3HP, 220V, 1ph, 18A, 3,450 RPM
Switch: Magnetic w/thermal overload protection
Table size: 13" x 83"
Tables: parallelogram design, precision ground cast iron
Cast iron fence size: 47" x 5-3/8"
knives: 4(HSS) 12" x 1/8" x 1-9/64"
Cutterhead diam: 3-3/4"
Cuts per minute: 19,800
Cutterhead speed: 4,950 RPM
Max. depth of cut: 1/8"
Max. rabbeting cut: 1/8"
Max. width of cut: 12"

This large capacity jointer, with it's big cast iron fence, 83" long table and 12" cutting width make edge jointing and flattening wide stock a breeze. It's parallelogram table adjustment mechanism guarantees tables stay perfectly aligned to each other throughout their vertical range and a half ton of cast iron mass dampens any motor vibration for perfect results every time.

FEATURES:
Shielded & lubricated bearings
Precision ground cast iron tables
Fully adjustable tables
Single V-belt drive
Easy access lever adjusted tables with height gauge
Heavy-duty center mounted fence with angle gauge
Built-in dust chute with 4" port
Powder coated paint
Large handwheels

Cutting Capacity
Width 6"
Depth 1/8"
Rabbeting 1/2"

Cutterhead
Speed 4500 & 5500 RPM
Number of Knives 3
Cuts per Minute 13500 & 16500
Diameter 2-1/2

Fence
Size 29-1/8"x4-3/4"
Tilts in/out 45° R&L
Positive Stops 90° , 45° R&L

Table
Length 46"
Width 7-5/8"
Rear Table 22-1/2"
Front Table 22-1/4"
Height from Floor 31-1/2"

Motor
Amps 12/6
Horsepower 1-1/2" single phase
Volts 120/240V
Hertz 60Hz
RPMS 3400

Overall
Width 46"
Depth 23"
Height 44"
Weight 264lbs
Warranty 2 Years

RIKON's 6" Jointer is loaded with features, starting with a powerful 1-1/2 HP, 2-speed motor for clean cuts on every type of wood. The multi-position switch is adjustable to any height and angle. It may also be mounted on either the in-feed or out-feed side of the machine.RIKON focused on ease of operation when designing the 20-110. Experience the convenience of the tool-less speed and belt change and locking head for accurate blade changes.This 6" Jointer is also the first to have a very unique and innovative micro-adjustable fence. Easily adjust the fence to any angle with a smooth turn of a handle. Not only is the fence micro-adjustable, it is also built with a space saving, rack and pinion design.

Features:

* Multi-Adjustable Fence
* Multi-Position Switch
* 4" Dust Port
* Space Saving Rack & Pinion Fence
* Tool-Less Belt Tension
* Locking Head

Hosted by TechsChoice.com