Kreg Tools Model# DB55 Pneumatic Semi-Automatic Foreman

When your production needs have outpaced the manual Kreg Jigs, look for the added speed and convenience of the FOREMAN Pocket Hole Machine. The semi-automatic FOREMAN features a pneumatic drill motor and automatically adjusting air clamping cylinder. To operate, simply position your material to be drilled and pull the lever forward. This motion supplies air to the clamping cylinder that automatically adjusts to your material thickness as well as activates the 3/4 hp drill motor. Finish the drill stroke by continuing to pull on the lever and then return the lever to the home position to cut the air supply.
SPECIFICATIONS:
Now with automatic oiler for pneumatic motor
. Lever operated, 1 second cycle time
. 3/4 hp pneumatic motor, automatic air clamping
. 90-120 psi recommended - Minimum compressor cap. of 5.3 cfm @ 90 psi
. 1/2" to 1-1/2" material capacity
. 19" H x 13-5/8" W x 22-5/8"D (35 lbs.)
. Tabletop height of 6-3/4"
. Fast, semi-automatic operation; automatic "hands-free" clamping, quiet pneumatic drill motor with lever operated drill stroke.
. Reliable, one-step drilling operation; drills flat-bottom, round-sided pocket hole that can be plugged.
. Adjustability to handle 1/2" through 1-1/2" thick material.
. Stable work surface with easily adjustable "swing-stop" material positioning guides.
. Hinged-top that allows easy access to drill bit and motor.

Kreg Tools Model# DB110 Electric Semi-Automatic Foreman

Semi-Automatic, FOREMAN Pocket Hole Machine When your production needs have outpaced the manual Kreg Jigs, look for the added speed and convenience of the FOREMAN Pocket Hole Machine. The semi-automatic FOREMAN features an electric drill motor and an adjustable clamping cylinder. To operate, simply position your material to be drilled and pull the lever forward. This motion activates the 3/4 hp drill motor and throws the clamping cylinder. Finish the drill stroke by continuing to pull on the lever and then return the lever to the home position.
Specifications:
. Entirely electric, no compressed air needed!
. Lever operated, 1 second cycle time
. 3/4 hp Electric motor, automatic clamping 1/2" to 1-1/2" material capacity
. 19" H x 13-5/8" W x 22-5/8"D (35 lbs.)
. Tabletop height of 6-3/4"

Kreg Tools Model# DK1100TP Pneumatic Single Spindle Machine

The DK1100 TP (Table-top Pneumatic) is housed in a compact cabinet so it can be built into a work surface saving space on the shop floor. This Single-spindle machine features the ability to center a screw in 1/2" to 1-1/2" thick material, hardened steel drill guides that maximize drill bit life and minimize bit deflection, swing stops that ease material positioning with both rails and panels, and a one-touch foot pedal that fires the drill spindle in a lightening quick one second. This is a fully pneumatic machine built to run day after day in rugged, high-production environments. We offer two other machines in this same line. DK1100 FP, Floor Standing Pnuematic and DK1100 FE, Floor Standing Electric versions. Our DK1100 single-spindle machines are fully-automatic production pocket hole machines. Designed to run in the most demanding high-volume production environments, they are built with true industrial quality motors that provide the power, precision and reliability to get the job done.
SPECIFICATIONS:
Hardened steel drill guide to maximize drill bit life
. One-touch, foot pedal operation
. Swing stops for optimized material positioning
. Dust collection chute for efficient chip removal

Kreg Tools Model# DK1100FP Pneumatic Single Spindle Machine

The DK1100 FP (Floor Pneumatic) is housed in a floor standing cabinet. This Single-spindle machine features the ability to center a screw in 1/2" to 1-1/2" thick material, hardened steel drill guides that maximize drill bit life and minimize bit deflection, swing stops that ease material positioning with both rails and panels, and a one-touch foot pedal that fires the drill spindle in a lightening quick one second. This is a fully pneumatic machine built to run day after day in rugged, high-production environments. We offer two other machines in this same line. DK1100 TP, Table Top Pnuematic and DK1100 FE,Floor Standing Electric versions. Our DK1100 single-spindle machines are fully-automatic production pocket hole machines. Designed to run in the most demanding high-volume production environments, they are built with true industrial quality motors that provide the power, precision and reliability to get the job done.
SPECIFICATIONS:
. Hardened steel drill guide to maximize drill bit life
. One-touch, foot pedal operation
. Swing stops for optimized material positioning
. Dust collection chute for efficient chip removal

The DK1100 FE (Floor Electric) is housed in a floor standing cabinet and runs on 110v power. This Single-spindle machine features the ability to center a screw in 1/2" to 1-1/2" thick material, hardened steel drill guides that maximize drill bit life and minimize bit deflection, swing stops that ease material positioning with both rails and panels, and a one-touch foot pedal that fires the drill spindle in a lightening quick one second. This is a fully pneumatic machine built to run day after day in rugged, high-production environments. We offer two other machines in this same line. DK1100 TP, Table Top Pnuematic and DK1100 FP, Floor Standing Pneumatic Electric versions. Our DK1100 single-spindle machines are fully-automatic production pocket hole machines. Designed to run in the most demanding high-volume production environments, they are built with true industrial quality motors that provide the power, precision and reliability to get the job done.
SPECIFICATIONS:
Hardened steel drill guide to maximize drill bit life
. One-touch, foot pedal operation
. Swing stops for optimized material positioning
. Dust collection chute for efficient chip removal

Kreg Tools Model DK3100 Three Spindle Machine

Pocket Holes... Twice as Fast! The DK3100 is the only pocket hole machine on the market that has the ability to drill two pocket holes in one machine cycle across rails of varying widths. Drill spindles in the machine are fixed at 3/4", 1" and 1-3/4" on center allowing it to drill today's most common rail widths of 1-1/2" up to 3-3/4" in one machine cycle. Three step drill bits are utilized in the machine, one of which is left-handed. Like all Kreg machines, the DK3100 features the ability to center a screw in 1/2" to 1-1/2" thick material, hardened steel drill guides that maximize drill bit life and minimize bit deflection, swing stops that ease material positioning with both rails and panels, and a one-touch foot pedal that fires the triple spindle drill head in a lightening quick one second.
SPECIFICATIONS:
. 3/4", 1", and 1-3/4" spindle spacings
. Hardened steel drill guide to maximize drill bit life
. One-touch, foot pedal operation
. Swing stops for optimized material positioning
. Dust collection chutes for efficient chip removal

Kreg Tools Model# DK5100 5 Spindle Panel Boring Machine

Panel Drilling Power! New to the market, the DK5100 multi-spindle pocket hole machine drills up to five pocket holes in one machine cycle. The machine contains 5 separate drill motors mounted 6" on center. Each drill motor can be individually actuated for the ability to drill one, two, three, four, or five pocket holes at a time. The ability to individually actuate any one of the drill spindles along with the 6" on center option makes these machines perfect for drilling pocket holes in panels to make cabinet sides, floors, walls, and even drawer box components. Like all Kreg pocket hole machines, the DK5100 features hardened steel drill guides that maximize drill bit life, swing stops that ease material positioning, and a one-touch foot pedal that fires all spindles at once.
SPECIFICATIONS:
5 drill spindle configuration, synchronized stroke
. Individually actuated motors
. Entirely pneumatic design
. Hardened steel drill guides to maximize drill bit life
. One-touch, foot pedal cycle
. Swing stops for optimized material positioning
. Dust collection chutes for efficient chip removal
. Prefilter and automatic lubricator

SPECIFICATIONS:
. Large 4' x 8', 5/4" thick melamine surface
. One-piece, tubular steel frame
. Retractable squaring fence for oversize frames
. Four high-quality clamping cylinders (90 psi minimum)
. E-Z Glide transfer arm
. 76" H x 110" W x 30" D (Wt. 350 lbs.) 30 angle

Kreg Tools Model# KFT4X8 Face Framing Table

Framing Table Assembling face frames in a production setting has never been easier thanks to our pneumatic clamping table. This table simplifies the assembly process and provides all skill levels the ability to produce consistently flush frames. As a result, widebelt sanding can often be eliminated including cross-grain clean-up of the stiles. This table features a large, 4' by 8' work surface tilted at a 30 degree angle from vertical which allows workpieces to easily fall by gravity into alignment without taking up a lot of space. The squaring fence down the left hand side of the table can be quickly retracted to allow assembly of frames longer than 8'. Four high-quality clamping cylinders glide up and down the transfer arm and can be fired either independently or in unison with the flip of a toggle switch.

#CT6066 Pneumatic screwgun/8ft poly. coil hose sold seperately.

Hosted by TechsChoice.com