Model 43-792
Delta Industrial Model 43-792 5-Speed Shaper with a 7 1/2HP, 3450 rpm three phase motor with automatic brake, 5-speed belt and pulley system, cast-iron sliding table, 3/4" and 1 1/4" spindles, three steel insert rings, work hold-down and cutterhead guard assembly, fence assembly, tools and instruction manual.

• Dependable 7 1/2HP, 3450 rpm three phase motor has an automatic brake that stops cutter in seconds. Belt tension lever lets operator change spindle quickly and easily.
• Work hold-downs help secure workpiece to table and fence to protect operator from chips and debris.
• Drop-in spindles (3/4" or 1 1/4" diameter) are easily mounted or removed, using a locking nut and special wrench supplied with the machine. Three removable steel table insert rings are supplied to accommodate various cutter diameters.
• Up-front controls include a large emergency stop button, forward/reverse switch for changing fpindle rotation, start/stop switch and spindle lock for removing or replacing cutter.
• Heavy cast-iron table measuring 31 3/4" X 39 5/8" for supporting large workpieces.
• Sliding table glides on six adjustable ball bearings for smooth table travel: runs close to the spindle for accurate shapng with minimal vibration. Table Lock halts sliding action for conventional shaping operation.
• Extruded aluminum fence mounted on heavy cast iron assembly is fully adjustable. Two ports, measuring 4" diameter, accept an accessory dust collector connector for a cleaner work environment.
• Miter gage with work clamp provides extra holddown support for large shaping projects.

Model 43-791
Delta Industrial Model 43-791 5-Speed Shaper with a 7 1/2HP, 3450 rpm three phase motor with automatic brake, 5-speed belt and pulley system, cast-iron table, 3/4" and 1 1/4" spindles, three steel insert rings, work hold-down and cutterhead guard assembly, fence assembly, tools and instruction manual.

Adjustable infeed and outfeed table w/locking knob Built in rabbeting ledge with 3/4" capacity Table "lips" on both sides of cutterhead aid in noise reduction Center mounted fence Magnetic controls Enclosed, sheet metal stand Positive fence stops at 90 degrees & 45 degrees

• Dependable 7 1/2HP, 3450 rpm three phase motor has an automatic brake that stops cutter in seconds. Belt tension lever lets operator change spindle quickly and easily.
• Work hold-downs help secure workpiece to table and fence to protect operator from chips and debris.
• Drop-in spindles (3/4" or 1 1/4" diameter) are easily mounted or removed, using a locking nut and special wrench supplied with the machine. Three removable steel table insert rings are supplied to accommodate various cutter diameters.
• Up-front controls include a large emergency stop button, forward/reverse switch for changing spindle rotation, start/stop switch and spindle lock for removing or replacing cutter.
• Heavy cast-iron table measuring 31 3/4" X 39 5/8" for supporting large workpieces.
• Extruded aluminum fence mounted on heavy cast iron assembly is fully adjustable. Two ports, measuring 4" diameter, accept an accessory dust collector connector for a cleaner work environment.
• Miter gage with work clamp provides extra holddown support for large shaping projects.

MOTOR
• 5 HP, three phase
SPINDLE
• (Diameters Furnished): 1 1/4"
• Capacity (under nut): 5 1/4"(133 mm)
• Travel: 3"(76 mm)
SPEEDS
• Forward and reverse: 7,000 & 10,000 rpm
TABLE (with extension)
• 40" X 27"(1016 X 686 mm)
• Height: 34"(864 mm)
• Insert opening diameters: 6 3/4"(171 mm); 3 1/2"(89 mm); 3"(76 mm) 1 3/8"(35 mm)
FENCE SIZE
• Each side 16 1/2 X 1 3/8" X 5"(418 X 35 X 127 mm)
OVERALL DIMENSIONS
• Height: 50"(1270 mm)
• Width: 40"(1016 mm)
• Depth: 27"(686 mm)
WEIGHT
• 456 lbs.(207 kg)

Model 43-460
Delta Industrial Model 43-460 Heavy-Duty Wood Shaper includes a 5HP, three phase, tri-voltage (200-230/460) motor with LVC switch, motor pulley, Poly V-belt drive, two 10" cast-iron extension wins, micro-adjust fence and guard assembly, 1 1/4" spindle, table inserts, starting pin, 2-speed spindle pulley, wrenches and instruction manual.

• The spindle, housing, motor, raising and lowering mechanism are a single self-contained unit, securely assembled to the underside of the table for absolute 90° spindle-to-table alignment.
• The rugged drive spindle assembly and permanently lubricated ball bearings are preloaded to prevent distortion at high speeds which assures accurate, chatter-free shaping.
• Massive 30" X 27" table (with standard cast-iron extension wings) provides extra support for shaping large work. Also, a precision ground face and ribbed under-table-construction prevents warping.
• Precision milled 3/8" X 3/4" T-slot, miter slot accommodate miter gage, sliding miter jig and other accessories for holding workpiece.
• Conveniently-grouped controls are at the front of the machine within easy reach of the operator from his normal working position.
• Deep-tapered spindle design allows for easy changing of accessory spindles from 1/2" to 1 1/4" to permit use of a wide variety of shaper cutters. Table opening size can be varied, as needed, by removing special table insert rings.
• Poly V-Drive System transmits more efficient torque to the spindle.

MOTOR
• 5HP, single phase
SPINDLE
• (Diameters Furnished): 1 1/4"
• Capacity (under nut): 5 1/4"(133 mm)
• Travel: 3"(76 mm)
SPEEDS
• Forward and reverse: 7,000 & 10,000 rpm
TABLE (with extension)
• 40" X 27"(1016 X 686 mm)
• Height: 34"(864 mm)
• Insert opening diameters: 6 3/4"(171 mm); 3 1/2"(89 mm); 3"(76 mm) 1 3/8"(35 mm)
FENCE SIZE
• Each side 16 1/2 X 1 3/8" X 5"(418 X 35 X 127 mm)
OVERALL DIMENSIONS
• Height: 50"(1270 mm)
• Width: 40"(1016 mm)
• Depth: 27"(686 mm)
WEIGHT
• 456 lbs.(207 kg)

Model 43-455
Delta Industrial Model 43-455 Heavy-Duty Wood Shaper includes a 5HP single phase, 230V, TEFC motor with full voltage motor starter (GPE), controls, motor pulley, Poly V-belt drive, two 10" cast-iron extension wings, micro-adjust fence and guard assembly, 1 1/4" spindle, table inserts, starting pin, 2-speed spindle pulley, wrenches and instruction manual.

• The spindle, housing, motor, raising and lowering mechanism are a single self-contained unit, securely assembled to the underside of the table for absolute 90° spindle-to-table alignment.
• The rugged ddrive spindle assembly and permanently lubricated ball bearings are preloaded to prevent distortion at high speeds which assures accurate, chatter-free shaping.
• Massive 30" X 27" table (with standard cast-iron extension wings) provides extra support for shaping large work. Also, a precision ground face and ribbed under-table-construction prevents warping.
• Precision milled 3/8" X 3/4" T-slot, miter slot accomodate miter gage, sliding miter jig and other accessories for holding workpiece.
• Conveniently-grouped controls are at the front of the machine within easy reach of the operator from his normal workig position.
• Deep-tapered spindle design alloes for easy changing of accessory spindles from 1/2" to 1 1/4" to permit use of a wide variety of shaper cutters. Table opening size can be varied, as needed, by removing special table insert rings.
• Poly V-Drive System transmits more efficient torque to the spindle.

Stock No. 708320
Model JWS-22CS
Spindle Speeds (RPM) 7,000 and 9,000 Reversing
Table Size (Wx D/in.) 22-3/8 x 18-1/8
Table T-Slot (In.) 3/8x3/4
Table Opening Diameter (In.) 5-1/4
Insert Opening Diameter (In.) 1-5/8 and 3-1/4
Fence Size (In.) 9-3/4x3-1/4
Spindle Size (In.) Spindle Capacity 1/2 and 3/4 (1/2)2-3/16,
Under Nut (In.) (3/4)2-3/16
Router Bit Collet Size (In.) 1/4 and 1/2
Spindle Travel (In.) 1-7/16
Table Height (In.) 33-1/4
Overall Dimensions (WxDxH/in.) 23 x 25 x 40
Motor(TEFC) 1-1/2HP, IPh, 115/230V, Prewired 115V
Net Weight (Lbs.) 190

708320 - "JWS-22CS, 1-1/2HP Shaper,1Ph 115/230V,1/2"" & 3/4"" Spindle"

1-1/2HP CLOSED STAND WOODWORKING SHAPER
Powerful 1-1/2HP totally enclosed fan cooled, reversing, single-phase motor
Extra large solid cast iron work surface
Heavy-duty one-piece steel stand with motor cover for stability
Handwheel and spindle lock for safe, accurate spindle height adjustments
Two reversible spindle speeds for Increased versatility
Independent left and right fences feature micro-adjustment and zero-clearance capabilities
Adjustable workpiece hold-downs mounted to fence
Spindle lock for quick and easy cutter removal

STANDARD EQUIPMENT
1/2 and 3/4 interchangeable spindles
1/2 and 1/4 router bit collets
Two table inserts
Two starting pins
Workpiece hold-downs
T-slot mitre gauge
Micro-adjustable fence
One-piece heavy-duty closed stand
Cutter guard
4 dust port

Stock No. 708502
Model JWS-34L
Spindle Speeds (RPM) 8,000 and 10,000
Table Size (WxD/in.) 21-5/8x25
Table T-Slot (in.) 3/8 x 3/4
Table Opening Diameter (In.) 6-3/16
Insert Opening Diameter (In.) 1-13/16 and 3-1/4
1 Fence Size (In.) 11-1/4x3
Spindle Size (In.) 3/4 and 1
Spindle Capacity Under Nut (In.) (3/4)3-3/16, (1)2-3/16
Router Bit Collet Size (In.) 1/4 and 1/2
Spindle Travel (In.) 2-7/8
Table Height (In.) 32-3/4
Overall Dimensions (WxDxH/in.) 25x22x42-1/4
Motor (TEFC) 2HP, IPh, 230V Only
NetWeightf (Lbs.) 317

708502 - JWS-34L, 2HP Shaper, 1Ph 230V Only, 3/4" & 1" Spindles, 22"x25" Table

2HP WOODWORKING SHAPER
Extra large, heavy-duty cast iron table
Fully enclosed cabinet stand
Handwheel and spindle lock for safe, accurate spindle height adjustments
Two reversible spindle speeds
Fully adjustable workpiece hold-downs on table
Safe, easy cutter setup is assisted with a positive detent spindle lock
Independent left and right fences are micro-adjustable
Dust port built into fence provides efficient collection of chips

STANDARD EQUIPMENT
3/4 and 1 interchangeable spindles
24V magnetic controls
Table and fence-mounted hold-downs
Adjustable cutter guard with 4 dust port
1/4 and 1/2 router bit collets
Two starting pins
T-slot mitre gauge
Micro-adjustable fence

Stock No. 708322
Model JWS-25CS
Spindle Speeds (RPMi 8,000 and 10,000
Table Size (WxD/in.) 25x25
Table T-Slot (In.) 3/8 x 3/4
Table Opening Diameter (In.) 7-1/4
insert Opening Diameter (In.) 7, 3-1/2 and 3
Fence Size (In.) 9-1/2x2-3/4
Spindle Size (in.) 1/2 and 3/4
Spindle Capacity Under Nut (In.) (1/2)3-1/2, (3/4)3-1/2
Router Bit Collet Size (In.) 1/4, 3/8 and 1/2
Spindle Travel (In.) 3
Table Height (in.) 34
Overall Dimensions (WxDxH/in.) 25 x 25 x 44
Motor (TEFC) 3HP, 1Ph,230V Only
Net Weight ((Lbs.)) 320

708322 - JWS-25CS, 3HP Shaper,1Ph 230V Only,1/2" & 3/4" Spndls,25"x25" Table

3HP WOODWORKING SHAPER
Features an extra large 25 x 18 solid cast iron table with an additional 25 x 7 extension
Fully enclosed heavy-duty steel stand with removable motor cover
Conveniently located hand wheel for easy and accurate spindle height adjustments
Two reversible spindle speeds
Fence assemblies are made quickly and easily with the unique ratcheting style levers
Four fully adjustable work hold-downs on table and fence help hold workpieces steady while shaping
Powerful 3HP, single phase motor delivers the power needed for even the largest jobs
Two-speed step pulley drive provides optimum speed and torque for a variety of cutters and materials
4 dust port for efficient collection of dust and shavings
Heavy-duty magnetic controls for added safety

STANDARD EQUIPMENT
1/2 and 3/4 interchangeable spindles
1/4 and 1/2 router collets
Workpiece hold-downs
T-slot mitre gauge
Micro-adjustable fence
Rigid, one-piece closed stand
Cutter guard
4 dust port
7 x 25 cast iron extension wing

This 1 HP Shaper provides the best of all worlds - a rock-solid router table, which allows the use of all those 1/4" and 1/2" shank router bits, as well as a powerful shaper, which opens up a new realm of 1/2" bore shaper cutters. A split adjustment fence also makes edge jointing and full edge profiling safe and easy. This Shaper should be a part of every woodshop.

Shop Fox W1701 - 1 HP Shaper with Router Spindle

Motor: 1 HP, 110V, 3,450 RPM, single-phase
Spindle travel: 7/8"
Spindle speed: 13,200 RPM
Table height: 34-1/4"
Heavy-duty miter gauge
Table opening: 3" with 1-3/4" and 1-3/8" insert rings (max. cutter diameter: 2-7/8")
Powder-coated paint and all ball-bearing construction
Spindle bore: 1/2"
Router bit spindles: Accepts 1/4" and 1/2" shank router bit
Large precision ground cast-iron table
Table size: 24-1/4" wide x 19" deep with 3/4" miter slot
Includes five spindle bushings for adjusting cutter spacing
Keyed safety switch
Split fence for full edge profiling
Footprint: 19" wide x 16-1/2" deep
Reversible motor

Shop Fox designed this Shaper for maximum performance at an affordable cost. With 25% more power and 40% more weight than other shapers in its price range, you can use larger cutters or stack multiple cutters to save time. The 3" spindle travel allows you to use the tall cutters or stack multiple cutters simultaneously. This gives you the ability to create more profile combinations and allows you to greatly reduce your time for tooling changes. By stacking multiple cutters you simply raise or lower the spindle for the next profile. This Shaper offers the best value on the market and comes with a Two-Year Warranty for your peace of mind.

Shop Fox W1674 - 2 HP Shaper

Motor: 2 HP, 110/220V, single-phase
Spindles: 1/2" and 3/4" (Included)
Spindle travel: 3"
Table size: 24" wide x 21" deep
Stand: Cabinet style, powder-coated paint
Power cord size: 10' x 14 gauge
Heavy-duty miter gauge
Large precision ground cast-iron table
All ball-bearing construction
Prewired for 220V
Spindle speeds: 7,000 & 10,000 RPM
Spindle openings: 1-1/4", 3-1/2" & 5"
Reversing switch
(SHOWN WITH OPTIONAL MOBILE BASE)

Large handwheel elevates the spindle for precise control and spindle lock knob ensures consistent results
Heavy, cast-iron assembly adjusts both independently for full edge profiling, and in unison for incremental cutting of very large profiles
Starting pins allow irregular shaping
Powder-coated paint
Magnetic switch with thermal overload protects the operator and machine
Interchangeable spindles are easily installed or removed
Removable table inserts provide work support close to the cutter
Built-in 3" dust port
Material hold-downs
HDPE fence facings

Shop Fox W1702 - 3 HP Shaper

This full-capacity 3 HP Shaper will handle the smallest profile cutters all the way up to the largest panel cutters with its three spindle sizes, 3" spindle travel and 5-1/2" maximum spindle opening. Two reversible speeds also provide the greatest flexibility for arranging cutters of all sizes. So, no matter what the shaping application is, whether it's simple edge profiling or making door stiles, rails and panels, this is the right machine for the job.


Motor: 3 HP, 220V, single-phase with reversing switch
Spindles: 1/2", 3/4" and 1" (Included)
Spindle travel: 3"
Large precision ground cast-iron table
Table size: 30-1/2" deep x 28-1/4" wide
Magnetic switch with thermal overload protector
Shielded and lubricated ball-bearings
Floor-to-table height is 34"
Spindle speeds: 7,000 & 10,000 RPM
Spindle openings: 1-3/8", 2-3/4", 4" & 5-1/2"
Approx. shipping weight: 353 lbs.

Stock No. (3HP, IPh) 1791273
Stock Number (5HP,3Ph) 1791274
Model 25A
Spindle Speeds (RPM) 7,500 and 10,000 Reversing
Table Size (LxW/in.) 29-1/4x25-1/2
Table Opening Diameter (In.) 6-3/16
Insert Opening Diameter (In.) 3-1/4
Fence Dimensions (LxW/in.) 13-5/16x2-7/8
Spindle Diameters (In.) 1/2, 3/4 and 1
Under Nut (In.) (1/2) 3 1/2, (3/4) 3 1/2, and (1)31/2
Router Bit Collet Diameter (In.) 1/4 and 1/2
Spindle Travel (In.) 3-3/4
Overall Dimensions (WxDxH/in.) 25 x 29 x 37
Motor (TEFC) 3HP,1Ph,230V, or5HP,3Ph, 230V
Net Weight (Lbs.) 733

MODEL 25A SHAPER
Spindle assembly mounted to bottom of table
Extra-large, heavy cast iron table withT-slot mitre gauge
Two reversible spindle speeds (forward and reverse)
Fully adjustable workpiece hold-downs
Safe and easy cutter setup is assisted by a positive detent spindle lock
Independently adjustable left and
right fences
4 dust collection port built into fence

STANDARD EQUIPMENT
3HPTEFC motor with magnetic controls
Reversing switch
Adjustable fence with 4 dust collection port
Mitre gauge
Starting pin
Workpiece hold-downs
1/4 and 1/2 collet router bit adapters
1/2, 3/4 and 1 spindles

Model: 27
Table Size (W x D/in): 28 x 29-1/2
Fence Size (in): 2 3-1/4 x 12
Overall Dimensions (W x D x H/in) 28 x 29-1/2 x 38
Motor: 5 HP, 3 Ph, 230V,
5 HP, 3 Ph, 460V,
5 HP, 1 Ph, 230V,
3 HP, 1 Ph, 230V or
3 HP, 3 Ph, 230
Shipping Weight (lbs) 488

Powermatic #1270111 - Model 27, 5HP, 1Ph, 230V, 1-1/4" Solid Spindle shaper

Spindle assembly is mounted to table bottom
Two-speed reversible spindle
Work piece hold-downs are fully adjustable
Spindle is mounted in heavy-duty precision ball bearings
Removable inserts make the use of any cutter safer via undercutting (raised panel cuts)
Precision fine-tune adjustment is easily accomplished and locked into position with "quick-lock" handles
Large, 28" x 29-1/2" heavy cast iron table with an 8" extension wing
T-slot for mitre gauge

Standard Equipment:
Motor with magnetic controls
Reversing switch
Accu-Fence
4" dust collection port
Work piece hold-downs
Starting pins
Wrenches
Table inserts, 3 each
Motor cover

Model: 27S
Table Size (W x D/in): 30 x 40
Fence Size (in): 2 4-1/2 x 18
Overall Dimensions (W x D x H/in): 32 x 21-1/2 x 38
Motor: 5 HP, 3 Ph, 230V,
5 HP, 3 Ph, 460V,
5 HP, 1 Ph, 230V
Shipping Weight (lbs): 657

Model: 27 & 27S
Spindle Speeds (RPM): 7000 & 10000
Reversing
Insert Opening Diameter (in): 2-15/16, 1-5/16, 4-3/16
Table Opening Diameter (in): 5
Spindle Size (in): 1-1/4, 1, 1/2 - 3/4
Under Nut (in): (1 1/4) 4-7/8,
(1) 4-7/8,
(1/2) 2-1/4,
(3/4) 3
Router Bit Collet Size (in): 1/2, 1/4
Spindle Travel (in): 3

Powermatic #1270153 - Model 27S, 5HP, 1Ph, 230V, 1-1/4" Solid Spindle, Miter Slot shaper

Spindle assembly is mounted to table bottom
Two-speed reversible spindle
Work piece hold-downs are fully adjustable
Spindle is mounted in heavy-duty precision ball bearings
Removable inserts make the use of any cutter safer via undercutting (raised panel cuts)
Precision fine-tune adjustment is easily accomplished and locked into position with "quick-lock" handles
Extra large, 30" x 40" heavy cast iron table
Available with or without a T-slot for mitre gauge

Stock Number: 1791244
Model: 29
Spindle Speeds (RPM): EVS 3000, 4000, 6000,
8000, 10000 Reversing
Table Size (W x D/in): 27-5/8 x 35-1/2
Table Opening Diameter (in): 8-15/16
Insert Opening Diameter (in): 2-1/2, 5-1/2 &
5-7/8 x 4-3/16 (oval)
Fence Size (in): 5-1/8 x 27-9/16
Spindle Size (in): 3/4, 1, 1-1/4
Under Nut (in): (3/4) 3 15/32, (1) 3 15/16
& (1 1/4) 4-3/4
Router Bit Collet Size (in): 3/8, 1/2
Spindle Travel (in): 7-1/16
Overall Dimensions (W x D x H/in): 33-7/16 x 35-7/16 x 46-1/16
Motor: 5 HP, 3 Ph, 230V/460V
Prewired 230V*
Shipping Weight (lbs): 815

Powermatic #1791244 - Model 29, 5HP, 3Ph, 230V/460V shaper

27-5/8" x 35-1/2" extra-thick cast iron table
Spindle tilts 45¸ forward and 5 degrees backward for bevel shaping
Three standard table inserts, smaller insert has a guide shoulder for copy work
Entire hold-down assembly flips out of the way for spindle changes
Two hold-downs and cutterhead shield are standard equipment

FEATURE

Sliding table with miter head, hold down and fence
Fully adjustable fence with dual digital readout
Large table with built-in slider with room for stock feeder
7-inch vertical spindle travel
Spindle tilts neg. 5 to pos. 45 degrees
Large diameter multiple table inserts
Five spindle speeds in forward and reverse with lighted indicator

BENEFIT

Can accommodate everything from multiple end cuts to tenons
Fast and accurate set-up and repeatability
Supports large work pieces; added safety option with feeder
Allows user to stack tooling
Increased versatility with tooling
Accommodate virtually any size cutter
The correct speed for any job

Powermatic #1791284 - Model TS29, 7-1/2HP, 3Ph, 230V/460V with Sliding Table shaper

The new TS29 is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, easy, and accurate set-ups.

The full guard includes two stock hold downs and a see through cover that flip up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish.

An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble free performance. Powered by a big 71/2HP motor that drives the spindle forward and reverse with five speeds.

The massive sliding table is fully supported by six tapered precision bearings through a full four foot stroke. In addition, on board the table is a large miter head complete with stock hold down clamp and a 56-inch miter fence with flip stop.

The large table can easily accommodate a stock feeder for longer production runs; this machine is built to handle any job.

Model Number TS29
Stock Number 1791284
Motor HP/Voltage/Phase 71/2HP 230/460V 3PH
Electric Controls 24V magnetic
Spindle Sizes with Capacity Under Nut 11/4" dia. x 61/4", 1" dia. x 6", 3/4" dia. x 31/2", 1/4" and 1/2" collets
Spindle Travel 7" vertical
Spindle Speeds rpm 3,000/4,000/6,000/8,000/10,000
Tilting Spindle 5 deg. back, 45 deg. forward
Overall Table Size L x W 511/2" x 331/2"
Maximum Diameter Cutter Below Table 9"
Maximum Diameter Cutter Above Table 12"
Fence Size (with Dual Digital Readouts) 46" x 5"
Fence Travel (Major and Minor) 53/8" and 35/8"
Slide Table Size 111/4" x 511/4"
Table Travel 491/4"
Table Inserts One tilting, one straight
Dust Connect Diameter (2) 5"
Minimum CFM Required 800
Shipping Weight 1,280 lbs
Net Weight 1,100 lbs
Overall Dimensions 51"L x 44"W x 53"H

Tools Supplied Spindle wrenches, Spanner wrench, Set of open end wrenches, Set of allen wrenches, Grease gun, Tool box

Hosted by TechsChoice.com